ICP Australia is proud to introduce ICP DAS’s G-4510 Power Saving PAC with Solar Charger and Optional Communication Module. Read more
No edges and corners: Your solution for high hygiene standards
Drives with the CM2H stainless steel servomotors have been specially designed for use in applications in food and beverage production.
Wear-resistant and lubrication-free: New igus bar stock for food
Treotham has expanded its wide range of igus iglidur round bars with four materials; among them two for the food sector: the heat-resistant material iglidur AC500 and the resilient material A250. Read more
Optimising ozone disinfection for water processes with Thermal Flow Meter
FCI’s ST80 Air/Gas Flow Meter Series, which is available in either insertion or inline configurations, is well suited for air or gas line flow measurements in various water treatment plant applications. Read more
Bronkhorst introduces the ES-FLOW ES-1x2C
In 2021 Bronkhorst released the latest ES-FLOW™ ES-1x3C, this is now followed up with the release of a new model of the ES-FLOW family: the ES-1x2C. This flow meter will cover the flow range just below the existing ES-1x3I or ES-1x3C.
Read more
Fast response FLT93F Flow Switch
Plant engineers and maintenance staff responsible for ensuring the reliable operation of positive air flow pressure and exhaust ventilation systems for clean rooms, labs, analyser houses or production areas will find the FLT93F Flow Switch from Fluid Components International (FCI) provides them a highly sensitive and reliable solution to monitor and alarm if their system is degrading, not operating to specifications, or has shut-down. Read more
Compact multifunctional mass flow meters/controllers for gases
The new FLEXI-FLOW by Bronkhorst combines the advantages of a unique through-chip-sensor with proven by-pass technology. Read more
ICP Electronics Australia presents ICP DAS’s PM-3133 series, 3-phase Smart Power Meter
ICP Australia is proud to introduce ICP DAS’s PM-3133 Series, which is inclusive of 3-phase Smart Power Meter. The most powerful, cost-effective, advanced PM-3133 series gives you access to real-time electric usage for three-phase power measurement. Read more
Precision compressed air thermal flow meter improves processes, reduces maintenance, and cuts costs
The compact FS10i Flow Meter Series is a dependable, economical and easy to install solution to measure the flow rate of compressed air, air and natural gas. They are accurate to ± 1.5 per cent of reading, ±0.5 per cent of full scale, with repeatability of ± 0.5 per cent of reading and have a response time of 4 seconds (1 time constant). Read more
ICP Electronics Australia presents new Modbus data concentrator
ICP Australia has introduced ICP DAS’s MDCL-705i Modbus Data Concentrator with Ethernet, RS-485 Serial Ports, and Data Logger. Read more
SIRIUS ACT: Push button performance in action
The Australian Food and Beverage industry has extensive demands for cleanliness, ruggedness, and quality. Equipment that does not meet these standards wastes valuable time through preventable failures and downtimes.
Process performance key to ELEMENT range success
The food and beverage sector is the largest manufacturing sector in the Australian economy and continues to grow. The Australian Government expects that by 2030 the industry will double in revenue with a focus on smart food and beverage manufacturing.
Read more
Robust switching solutions for the food and beverage industry
With close to 80 years of experience in designing and manufacturing, KATKO specialises in the field of industrial switching for the Food and Beverage industry.
Read more
Taking a load off baking ovens
When asked what he loved most about his job in the baking industry, Bakery Combinations general manager, Mark Hodgson, said that the appeal of working with MIWE was too hard to ignore when the opportunity arose to join the team two years ago.
Read more
Skills management and development re-invented for the plant floor
If you’re like most organisations today, you probably can’t recruit and train new hires quickly enough to replace the outflow of workers retiring or leaving your organisation each year. Some of your workers have likely been with your organisation for decades. When they leave, they take all of their experience and tribal knowledge out the door with them, making them impossible to replace overnight.
Read more
SICK outdoorScan3 Safety laser scanner with Dynamic Weather Assist (DWA) Safety System
The world’s first IEC 62998-certified safety laser scanner for indoor and outdoor use opens up a whole new world of safe and easy automation. Read more
New Variable Speed Drive (VSD) Brumby compressor
The CAPS Brumby range of rotary screw air compressors has now been extended to include variable speed compressors to compliment the current fixed speed range. Units are available in sizes ranging from 5 to 15 kW. Read more
Quality food requires quality temperature control
Unlike most chillers in the marketplace, MTA chillers and heat pumps are specifically designed for the food and drink industry, as confirmed by countless prestigious customers worldwide in the most diverse and demanding applications. Read more
New VariBlast precision safety air gun with nano nozzle provides focused blast for blowoff
EXAIR’s new VariBlast Precision Safety Air Gun with Nano Super Air Nozzle provides a focused blast of air capable of handling tough jobs with remarkable strength. This CE compliant lightweight air gun employs an engineered variable flow trigger able to produce variable force upon a target simply by pulling the trigger. Read more
New Fluke 730G Series Pneumatic/Hydraulic Portable test pumps solutions for process industries
Fluke Australia adds new pneumatic/hydraulic test pumps to its Fluke 730G series for pressure testing and calibration solutions. The new Fluke 730G series consist of a digital calibrator in a gauge form and a range of portable test pumps feature fast pressure generation and stable pressure and are easy-to-use. Read more